-
conversation with zyp (the brain child) of the design.
tl;dr; see at the end
as of current code, all configured out endpoints are always enabled unless explicitly naked, and once a packet is receiv…
-
## Environment
- Module or chip used: [ESP32-WROOM-32]
- IDF version: v4.2
-
## Problem Description
Hello, I'm migrating code from esp-idf v3.2 to version v4.2.
I'm using SPH0645 i2s micro…
-
Rrunning the test `sudo ./test -c` produces SD card errors in `dmesg`:
`[33490.769029] mmcblk0: error -110 transferring data, sector 137216, nr 16, cmd response 0x900, card status 0xc00`
More ve…
-
I installed Arduino IDE 2.3.0, then added 'ESP32 Dev Module' Board, then got makeEspArduino, running it like this:
```$ make -f ~/Arduino/misc/makeEspArduino/makeEspArduino.mk CHIP=esp32 BOARD=esp32 …
z0rti updated
6 months ago
-
Hi,
I'm using this library on a Teensy 4.1, using the framebuffer. Generally, I draw my graphics to a canvas (Adafruit GFXcanvas16), and then push it to the display using:
```
tft.writeRect(0, 0,…
-
Yes, I've seen issue #459, but that guy had nouveau, kernel 4.10, and Ubuntu 17.04, whereas I have Ubuntu 18.04, kernel 4.15, and Intel graphics drivers, so the situation may well be entirely differen…
-
hi,
i read several issues about the click/pop noise when playing short sounds on the ESP32 via AudioOutputI2S, including
https://github.com/earlephilhower/ESP8266Audio/issues/68
https://github.co…
-
**Is your feature request related to a problem? Please describe.**
I've got the data cache enabled on an STM32H7 and want to place some buffers into the section with deactivated cache via `__nocache`…
-
to reproduce:
Set vulkan renderer (restart)
Load a psx game with beetle psx HW
RA never goes Fullscreen and eventually crashes out/closes...nothing int he log to indicate the issue
Latest nightly …
-
Do you have any plans to support one of the Intel FPGAs, like Arria 10 devices?