-
when you setup a connection to wifi everithing is fine but if you need to switch to another wifi end the name of new wifi is shorter than the previous one there is a problem because the last part of p…
-
### Board
MH-ET LIVE ESP32 MiniKIT
### Device Description
W5500 ethernet mini board
### Hardware Configuration
no
### Version
v2.0.7
### IDE Name
Arduino Ide 1.8.19
### Operating System
Win…
-
I'm playing around with this a bit to see if it will work as a replacement to the RPi I have been running as a time server for many years. One thing that I noticed when I added this as a time server t…
-
### The problem
I am building a 2nd bang bang thermostat to replace another; used exact same config only changing entity names and when installed the gpio pins do not respond, tried every available…
-
Referring to [this thread on the forum](https://www.domoticz.com/forum/viewtopic.php?p=298475#p298475)
The brightness slider in the colorpicker of a RGB switch does not work correctly
![image](htt…
-
Hallo,
ich habe seit der 0.5.78 der Verhalten dass alle 2-3 Tage, erst die Webseite auf dem ESP32 nicht mehr erreichbar ist, aber noch ca. 1h Daten empfangen und auch per MQTT übertragen werden.
…
-
**Build tool used:**
- [ X] Arudino
- [ ] Platformio (Visual Studio Code plugin)
- [ ] Platformio CLI
- [ ] Other
**Board used (ESP32/ESP8266/Arudino):**
- [ ] ESP8266-based
- [ X] ES…
-
- design the concept
- 2 board serial communication
- request for file from another board using spi
- web file exchange
- host web server in pi. access using esp wifi.
- access face ca…
-
### Basic Infos
I am trying to reconnect to the last known configurations or saved credentials(ssid, password) after the connection is lost temporarily for a while. In case it was reconfigured or …
-
hi, not a bug, but do you think you solution would work with a tds meter as well?
i just bought parts for the PH sensor and looking forward to tinkering :)
there are these tds probes incl daught…