-
The 'esptool.exe' part of the actual ESP32 releases is not working for ESP32 flashing.
Initial flashing procedure for ESP32 is missing or at least confusing.
Initial images needed for initial setu…
-
In order to be able to use GitHub as a CDN for files, you need to have at least a tag put to the files.
Can you make a tag in Git, so we can refer to a "version" when linking to it?
TD-er updated
2 years ago
-
After the latest source & Custom.h changes I am not able to compile the Custom firmware using Vagrant anymore.
The compilation log ends with:
default: Compiling .pio/build/custom_IR_ESP8266_4M1M/F…
-
Just tried to make a fresh custom build using Vagrant environment, unfortunately it ends with the following error:
....
....
default: Compiling .pio/build/custom_IR_ESP8266_4M1M/FrameworkArduin…
-
### PROBLEM DESCRIPTION
Not possible to run firmware with MAX_DOMOTICZ_IDX = (7 or higher) on ESP32 to control more than 6 relays via MQTT
### REQUESTED INFORMATION
After getting enthusiastic ab…
-
Wanneer de CC1101 een pakket ontvangt zal hij een GDO pin hoog maken. De pin is verbonden met de ESP8266 en zorgt ervoor dat er een interrupt service routine (ISR) wordt uigevoerd. Deze ISR wordt bij…
-
In my setup I use Domoticz as controller of several nodes running EspEasy (NodeMCU and Sonoff).
Since I recently updated software to mega-20191208 the combination of P001 and P029 causes incorrect be…
-
Should this work to upload a binary from the Arduino IDE using the ESP32 / Arduino framework? It doesn't for me.
I have this sketch:
```
void setup() {
Serial.begin(115200);
Serial.println(…
-
### Checklist
- [x] The title of this issue is "to the point" and descriptive.
- [x] This issue describes what is happening.
- [x] This issue describes what components are affected (e.g. name of pl…
-
Hello, how can i use a max6675 thermocoupler on a RPIEasy?
I see at the ESPEasy the max6675 is supported.
https://github.com/letscontrolit/ESPEasyPluginPlayground/blob/master/_P120_Thermocouple.in…