-
I am looking to replace tuya firmware on 3 TS0505B bulbs. I am uncertain if the bulbs would be supported?
Thank you for your work!
-
### The problem
I was able to bring up the ESP32-S3-DevKitC-1 N16R8 using esphome 2024.11.
Unfortunately, the controller appears to be unusually sluggish, and I can’t determine the cause. My board t…
-
The webpage of the [HDC1080 ](https://esphome.io/components/sensor/hdc1080.html)states:
> Currently, the platform doesn’t support activating the built-in heater, as it seems to only be rarely of us…
-
Unfortunately, I can't set up the integration. As soon as I add it, my Home Assistant system completely crashes. I can force a restart using "core restart" via SSH, and then I see that the integration…
-
I'm working with ESPHome on an RGB bulb - and if I interact with the bulb for a bit, scrubbing through colours etc, the connection will eventually drop and not come back up without a power cycle.
S…
lmcd updated
11 months ago
-
### The problem
I've been using ESPHome for about 18 months.
Every couple of months I'd get a notification in Home Assistant that something needed to be reconfigured.
Normally I'd just click thro…
-
### The problem
I am using the ESP32-S3-BOX (non 3) firmware from esphome/firmware. However, after updating to esphome 2024.5 I get no voice return. The text on the display does come up correctly and…
-
### The problem
I believe yaml and logs are enough, long story short;
I am using Sonoff THR320 with THS01 Sensor.
I have working HA setup for my home automation.
I've tried several tutorials but i…
-
### The problem
I have a [SparkFun Thing Plus](https://www.sparkfun.com/products/17381) that I use as a garage door controller. Up through 2022.11.5, the wifi has been rock solid. On 2022.12.0 and …
-
Hi, first of all you do a great job with Espurna.
I have a ESP6288-12E with a DHT22. The ESP is battery powered so I would like to use Espurna with deep sleep mode. Is this possible? I would like to …