-
A few times after I flashed skulls/coreboot onto an x230 board, the board doesn't boot anymore. On pressing the power button, the power button LED flashes 3 times and then there is no further response…
abhas updated
2 years ago
-
### Board
esp32s3
### Device Description
esp32s3 devkitc n8r8
### Hardware Configuration
Native USB port plugged into computer, serial convert USB port not plugged in.
### Version
…
-
I have a "No Neutral" 2 gang touch light switch. The markings on the board say WIFI-W6B and i can see a ESP8285 on board.
I can't get this to flash using tuya convert. The switch seems to connect…
DJ-Q updated
3 months ago
-
Hello, I'm working on a project using this board, is it possible to have the source code of the bootloader? Is it a Bossa bootloader, right? I would like to implement a DFU mode like the Nordic bootlo…
-
I flashed 0.0.3 to my x230 and Windows, even in safe mode, hangs and won't boot. After flashing do I need to reinstall windows? What is the expected behavior?
-
```
Here is two diffs for enable EEPROM support.
- Fixes bug from Issue #65
- Adds extra EEPROM page r/w code
- Still complied to 256 words if LED_START_FLASHES=0 and LED_DATA_FLASH=0
- Tested on…
-
```
Here is two diffs for enable EEPROM support.
- Fixes bug from Issue #65
- Adds extra EEPROM page r/w code
- Still complied to 256 words if LED_START_FLASHES=0 and LED_DATA_FLASH=0
- Tested on…
-
Hi @wholder,
I've been trying out your debugger setup as you've described in [debugwire2](https://sites.google.com/site/wayneholder/debugwire2). I've been testing this with an Arduino Uno as ISP an…
-
## Basic information
- Board URL (official): https://www.luckfox.com/Core3566-Series
…
-
After Flashing I get a blank blue screen when entering the bios. I can still load windows but can no longer access bios options. it is just a blue screen. any ideas? do you happen to have the offi…