-
Hi i tried to flash two ESP32 with the ESPDownloadTool v3.8.5 with your settings.
`UnicodeDecodeError: 'gb2312' codec can't decode bytes in position 18-19: illegal multibyte sequence`
is the respons…
-
mousetst from CuteMouse can also switch between different video modes using 0-7/a-f.
All of these modes work except for 'c'. Then the following error is logged and the window stays black:
```
ERR…
-
We are unable to full flash 3501 racks.
Says invalid key, or cantDownloadToSpecifiedAddress
We tried using bri3d's SA2 script with the SA2 tape pulled from a SGO file, but it resulted in an invali…
dkiiv updated
11 months ago
-
**Is your feature request related to a problem? Please describe.**
I have a T430 but there are three board names
**Describe the solution you'd like**
I would like an explanation of the builds, wh…
-
Dear all, I have a thermostat BOEK [TOL47WIFI](https://www.beok-controls.com/Content/upload/PDF/2021837153/TOL47-Heating-Thermostat-Manual.pdf)-EP with a [WBR3 ](https://developer.tuya.com/en/docs/io…
-
OSInfo:
Description: Ubuntu 22.04.2 LTS
X64, Linux kernel 5.15.0-57-generic
Use cargo build method or prebuilt ELF from action both have such problem:
```
wchisp -v flash ../WebServer.he…
-
### Description
Hello, I have been trying to get the Micro flashed from WSL.
I have not succeeded.
I posted some comments on another issue I thought would be related to my problem, but maybe th…
-
I have flashed the heart rate example to a [nRF52840-DK)](https://www.nordicsemi.com/Software-and-tools/Development-Kits/nRF52840-DK) board, and am unable to get anything to connect. It seems that the…
-
I have four sonoff mini diy. They were delivered with the 3.3.0 firmware release built in.
I managed to set diy mode (with jumper) and update tasmota firmware for three of them.
But when I connect…
-
Flashing outputted the following:
[2016-09-15 13:17:49.080] Looking for a compatible device that can jump to the Nordic bootloader
[2016-09-15 13:17:49.188] Device found, jumping to the Nordic b…