-
### Is your feature request related to a problem? Please describe.
The problem is when a very large battery is present and a voltage drop from bulk 55.2V to 54V float voltage happens in one go. A lot…
-
Hi
after some weeks of troubleshooting, I'm pretty sure there is a problem with the integration. Let me describe:
When the sun goes down, the inverter switch off and home assistant is not able to …
-
It appears there's a few slight variations in the values returned from a SunSynk inverter vs a Deye.
e.g. I had to disable "Battery Status" and "Grid Status" as these did not work for my 5kW Sunsyn…
-
Hi,
Did someone manage to connect/pair with the APsystem YC600 micro omvormer.
They should connect with zigbee but it is not pairing at all.
Any sugestions are welcom.
Kind regards,
Peter
-
Hello and thank you for this integration !!!
I have 2 Fronius Symo connected in daisy chain and a Fronius smartmeter. I set up this integration 3 times, for slave 1 and 2 as the inverters and 240 …
-
Hi
My installer had to upgrade my firmware, and after having the system work correctly for about a week, it stopped. I'm currently on inverter firmware version V5 and ARM version V2 according to G…
-
### The problem
If adding an optional smart meter to the Growatt solar installation you feed additional data from the smart meter to the Growatt inverter. This extra information is exposed in Growatt…
-
Sometimes ModBus traffic fails with CRC errors after several hours of correct operation:
```
[W][modbus:109]: Modbus CRC Check failed! 8498!=10
[W][modbus:109]: Modbus CRC Check failed! 4F02!=10
…
-
### What's needed?
A `LogicalMeter` implementation will have to support the follow (method) streams:
1. Grid meter power measurement
2. **Client load (sink/black hole - unknown consumer&produce…
-
This integration is so cool, best I've found so far.
However I would like it to have a "standard" install method. It's not tooo difficult as it is now, but HACS would take care of updates.
Would do …