-
A fibaro motion sensor that reports more than 10.000 Lux in the Fibaro Home Center App stucks in HomeKit at 10.000lux.
So in HomeKit the displayed value is 10.000lx permanently as long as the sensor …
-
Hello ilCato,
your latest version duplicated the temperature and humidity sensors from netatmo plugin (the only different thing is the "model", on one it appear com.fibaro.temperaturesensor and the…
-
**Describe Your Problem:**
HomeKit cannot add homebridge on my Synology NAS to the configuration, that was working many weeks ago.
**Logs:**
```
[s6-init] making user provided files avai…
-
Hi,
I have a Bosch Condens 5000i boiler that is not recognized by the firmware (1.9.5)
> devices
>
> These 3 were recognized by EMS-ESP:
> unknown?: unknown? (DeviceID: 0x08, ProductID: 195…
-
sys.exc_info is not implemented for the ESP32 yet. It is used in several modules in this repo.
Would it be OK to replace them with Exception.message such as:
```
except :
print("MicroWebSoc…
-
Check report as below:
```
1/5. linaro cloud check
================================================
[nodepool] auth------------------------- PASSED
[nodepool] securitygroup---------------- PASSED
[nod…
-
Check report as below:
```
1/5. huaweicloud cloud check
================================================
[nodepool] auth------------------------- PASSED
[nodepool] securitygroup---------------- PASSED…
-
Check report as below:
```
1/5. huaweicloud cloud check
================================================
[nodepool] auth------------------------- PASSED
[nodepool] securitygroup---------------- PASSED…
-
I'm finding it difficult to switch thermostat modes in HA with my RC20.
For example, switching from Auto to Off changes the set temperature as expected, but:
- the HA UI shows 7 Auto;
- the HA lo…
-
**Home Assistant release with the issue:**
0.96.3
**Last working Home Assistant release (if known):**
0.95.4
**Operating environment (Hass.io/Docker/Windows/etc.):**
venv / Linux
…