-
I've been using xhyve as a library from Go. I was able to statically compile my Go program against xhyve using CGO. But, whenever I boot a VM, for some reason none of the PCI devices are being recogni…
-
We add echo nct7904 0x2d > /sys/bus/i2c/devices/i2c-6/new_device in start script, but failed.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.11.06 13:23:09 =~=~=~=~=~=~=~=~=~=~=~=
Booting Linux on physical C…
-
Stale zpool.cache files are causing downstream headaches when booting off ZFS and instructions for generating new ones are convoluted at best. It would be useful if we had a command to refresh the zpo…
-
```
What steps will reproduce the problem?
1. Setup keyscript with anything that echos keypresses (like keyscript below)
2. Point to keyscript in /etc/crypttab (SEE /ETC/CRYPTTAB BELOW)
3. Update-init…
-
```
What steps will reproduce the problem?
1. Setup keyscript with anything that echos keypresses (like keyscript below)
2. Point to keyscript in /etc/crypttab (SEE /ETC/CRYPTTAB BELOW)
3. Update-init…
-
```
What steps will reproduce the problem?
1. Setup keyscript with anything that echos keypresses (like keyscript below)
2. Point to keyscript in /etc/crypttab (SEE /ETC/CRYPTTAB BELOW)
3. Update-init…
-
I posted this on the i3wm mailing list and was advise to post this as a possible bug here.
So, been using i3wm for a bit over a year across multiple distros (Debian6, 7 and Testing; Ubuntu 14.04, 14.…
-
```
What steps will reproduce the problem?
1. Setup keyscript with anything that echos keypresses (like keyscript below)
2. Point to keyscript in /etc/crypttab (SEE /ETC/CRYPTTAB BELOW)
3. Update-init…
-
Having an issue-- found it with both 3.14.58 and 4.1.15 so it must be systemic?
Hardware:
Beaglebone black with USB wireless (Novatel USB760).
I'm running a simple script that sends an "AT" to the …
-
Hi,
Regarding the dailies version of zfs: 0.6.3-22~2d9d57~jessie
When installing zfsutils (0.6.3-22~2d9d57~jessie) to a VirtualBox instance of Debian Jessie, I receive the following error (repeated…