-
When Rx and Tx are running at the same time doing some settings in the Rx or Tx locks up both and eventually program is stalled and LimeSDR is left in a non working state and needs cold reboot (USB pl…
f4exb updated
6 years ago
-
hi not sure where to put...
successful build of dsdcc but sdrangel still not detect it ...
sudo ldconfig tried
-
Hi ,
`Traceback (most recent call last):
File "MeasureDelay.py", line 186, in
if __name__ == '__main__': main()
File "MeasureDelay.py", line 183, in main
dumpDir=options.dumpDir,
…
-
Edouard,
I am finding that 7.000 000 S/s is perfect for SDRAngel in receive (Source) but I am also finding that TX (Sink) the audio quality of the transmitted voice sounds MUCH better if I am runni…
-
Is it possible to add a scan feature to some demod plugins. Possibly based on activity on preset frequencies or signal above certain level in passband ? Would be a very handy feature.
-
## Expected Behavior
In spectrum analyzer or record signal, I set the antenna for LimeSDR, and the current antenna should match after I click record.
## Actual Behavior
The antenna index is s…
-
I've been seeing an issue that when I first start a sink (transmit) session in SDRAngel the 7 - 10 second delay is still apparent, but as soon as I change the sample rate from something like 7.000 000…
-
I'm seeing an issue where I have a 'known-good' preset and everything seems to adjust right for frequency, sampling, gain settings, ect, but when I start the receiver the gain seems low. It's not unti…
-
Release: 3.8.2
Platform: Windows 10
Source: LimeSDR
Issue description: When I am using the AM demodulator and SSB demodulator, I will sometimes go to the delta-F box and start typing 0 (zero). …
-
## Expected Behavior
Capture signals and display them.
## Actual Behavior
No signals captured. Here's the error on stdout:
`[WARNING::LimeSDR.py::receive_sync] LimeSDR: Failed to receive stre…