-
Hello,
(This is more of a question/remark than an issue.)
I've read the code in the lorawan branch of mbed-os and I've noted Ticker are used to implement timers required by the semtech stack. Tick…
-
Hi All.
Now I am designing project with using Atmega 644p (8MYz), Arduino IDE 1.6.8.
After writting of bootloader in an controller is done the Led blinks twice with period one second. After loading …
-
Hi,
currently, I am using STM32 Nucleo-64 board with Semtech SX1272 and the Multitech Conduit Gateway.
I have a problem with my code. If I push the button, the STM32 Board is starting the transm…
-
### Description
- Type: Bug
- Priority: Major
---------------------------------------------------------------
## Bug
**Target**
EFM32GG_STK3700
**Toolchain:**
GCC_ARM
**mbed-cli ve…
-
Does your library allow for the use of SCAN_MODE_LOW_LATENCY on Android? I am using it to scan and connect to many devices and am hoping that enabling this will decrease my scan/connection times.
-
Hi, Everyone:
I am porting SX1276 and Lorawan stack to stm32l051c8t6, using 433 BAND, after sent a UNCONFIRMED packet, the LoRaMacStatus is always BUSY, and LoRaMacState always is LORAMAC_TX_RU…
-
Hi, thank very much for you great job, this library is very useful.
I figure out the transmission time is about 1 sec. but i think that time seems too much. Maybe I've wrong in my sketch ?
The recei…
-
The Badgerboard core library includes a copy of https://github.com/FaBoPlatform/FaBoHumidity-HTS221-Library When compiling unrelated other sketches that rely on that library, in an Arduino IDE into wh…
-
### Description
- Type: Bug
- Priority: Major
- Related: https://github.com/ARMmbed/mbed-os/pull/5854, https://github.com/ARMmbed/mbed-os/pull/5866, https://github.com/ARMmbed/mbed-os/issues/6199
…
-
Hi, I am making a home automation sensor network using RFM69's. Set-up is working great so far but I am having a small problem...
I'm using the example "DeepSleep_usingLowPowerLibrary" to test the …