-
### LVGL version
V9.1.1
### What happened?
Hi,
i am using lvgl with arduino Due (you can see a rc transmitterr posted the project part on the forum) and i have sommes issue when i want to switc…
-
Dear,
I just try new support target "esp32c6", but i got error as below error log:
-------- idf_py_stderr_output -------------
CMake Error at /usr/share/cmake-3.22/Modules/CMakeTestCCompiler.…
-
没有找到c++的demo,我原来用别的芯片时的一个c++使用LVGL的代码。
移植过来后运行,
无规则的报下面这个提示,开始怀疑是与字体有关,后面发现不是。
报错的时间无法确定。
exception_entry
mcause=38000004
mepc:a000ac5c
mtval:00000047
Load address misaligned
-
### Perform all steps below and tick them with [x]
- [x] Read the [FAQ](https://docs.lvgl.io/master/intro/index.html#faq)
- [x] Check the related part of the [Documentation](https://docs.lvgl.io…
-
### Describe the Bug
After flashing with via or default, after powering on numpad it is totally unresponsive after 3-5 seconds from powering.
### Keyboard Used
qmk comopile -b gmmk/numpad -km via/…
-
Firmware: maixpy_v0.5.0_123_g859098d
NNcase: v0.2.0 Beta4
I saw this [issue ](https://github.com/sipeed/MaixPy/issues/182)and it said to use the latest firmware to support kmodel v4. I even tried …
-
Thank you very much looking into an 8080 type interface. I wanted to do the same by myself also with a RA8876-compatible controller for a 400x1280 screen address in portrait mode, but mounted in lands…
-
### Introduce the problem
Hi All,
Hoping someone can help me out with this.
I have direct rendering working in 8.3
Trying to set it up in 9 like
```C
disp = lv_display_create(480, 480);…
-
Problem: I have fully wired in the Robin Nano V3 and I am getting temp readings that bounce between -8000 and 8000. The values appear to be random and change quickly. When I unplug the 100K thermist…
-
### Describe the Bug
### What Works
The entire wired mode is fully operational and `KC_MS_L/D/U` all work even in 2.4GHz wireless.
### What Happened
`KC_WH_U/D/L/R, KC_BTN1, KC_BTN2` all produ…