-
I just want to use ERPNext for Leather Tannery business but the software system is built for discrete manufacturing with BoM. In leather tanning process, you start with the by purchasing and storing r…
-
im log kommt:
komoot.0 | 2024-02-09 13:08:40.089 | warn | Status 302: www.komoot.de/user/28xxx/tours?type=recorded
komoot.0 | 2024-02-09 13:08:40.288 | warn | Status 302: www.komoot.de/user/…
-
In a previous post I have it working and I have two devices that emulate a keyboard for the purposes of reading magnetic cards. One doesn't appear to be picked up, the other works perfectly. The pro…
-
See [here](http://www.script-solution.de/community/support-board/posts_36_4142_1.html#b_22842).
-
Kernel compiled from https://github.com/ev3dev/ev3-kernel (Latest commit 3aaf365 on 8 May)
I think might have found it, not sure though.
In https://www.kernel.org/doc/Documentation/serial/tty.txt
>…
-
Wollen wir mal ein Hangout/Videokonferenz machen, um uns zu unterhalten?
@nicolasraube @Ritze279 @ijontychie
-
Regarding hardware versions:
> a major number for major layout and schematic changes such as changes to board dimensions, components placement or general functionality and
> a minor number for min…
-
Currently the TAP_Upper_PCB_r2 part has a 1mm deep relief for the pins and solder joints of the JST connector on the OptoTap v2.1 PCB so the PCB can sit flush when screwed down, however the pins of th…
-
The [Pervasive Display e-Paper BoosterPack](http://embeddedcomputing.weebly.com/pervasive-display-e-paper-epd-extension-kit.html) is based on e-ink and only requires power during the update. Perfect f…
-
I was able to setup a cups server on Raspberry Pi running AlmaLinux 8 with the printer added via USB using the driver from the brlaser install using this command
`sudo dnf install printer-driver-br…