-
from @tigoe
Attached is a kluge for getting port's board name.
A real version could look for the user’s ~/Library/Arduino15/packages, and in each package folder keep looking for boards.txt files, a…
-
Need to prove the following unproved:
commander.adb:146:48: medium: range check might fail
commander.adb:147:48: medium: range check might fail
commander.adb:148:28: medium: range check might fai…
-
# Write Status Screen
## write the status screen for the GUI. This status screen should include the following:
- Temperature Graphs
- Motor Control
- Temperature Control
- Print Status
- Pa…
-
```
Feature that you'd like us to add or change you'd like us to make:
Don't allow motors to start after APM bootup until explicitly enabled by some
means.
If the THR_MIN setting is not 0 then motor…
-
```
Feature that you'd like us to add or change you'd like us to make:
Don't allow motors to start after APM bootup until explicitly enabled by some
means.
If the THR_MIN setting is not 0 then motor…
-
```
Feature that you'd like us to add or change you'd like us to make:
Don't allow motors to start after APM bootup until explicitly enabled by some
means.
If the THR_MIN setting is not 0 then motor…
-
```
Feature that you'd like us to add or change you'd like us to make:
Don't allow motors to start after APM bootup until explicitly enabled by some
means.
If the THR_MIN setting is not 0 then motor…
-
Operating system: Raspberry Pi OS Bullseye
Python version: 3.9.2
Pi model: Pi Zero
GPIO Zero version: e.g. 1.6.2
Pin factory used: RPiGPIO
RpiMotorLib uses RPiGPIO as backend. Pins 20 and 21 ar…
-
```
Photographers like to have an open front view (AOV). Even if a 14*V is used,
frame width and length can make significant control differences. For example,
a narrow 14*V will have higher differ…
-
```
Photographers like to have an open front view (AOV). Even if a 14*V is used,
frame width and length can make significant control differences. For example,
a narrow 14*V will have higher differ…