-
If I have this simple program:
```
void app_start(int argc, char *argv[])
{
}
```
Then when it runs it draws about 4 mA. However if I hack it like this:
```
void app_start(int argc, char *argv[])
{…
-
Using [this simple application](https://github.com/tommikas/ble-example) on Nucleo F401RE with the X-NUCLEO-IDB05A1 BLE shield.
The device is visible and when I attempt to connect to it none of the c…
-
/usr/bin/arm-none-eabi-ld -L /usr/lib/gcc/arm-none-eabi/4.8/armv6-m/ -L /usr/lib/arm-none-eabi/newlib/armv6-m/ -T nrf51.ld nrf51_startup.o system_nrf51.o heap.o delay.o fifo.o uart.o radio.o demo_rad…
-
With the default demo code about DFU, I got the message “Selected file is not supported.” after I selected hex file. Why?
-
This is a great project and has been very helpful. But OpenOCD is open source and you have not indicated how to rebuild that source from scratch. This is not a distribution of source, but of binarie…
ghost updated
8 years ago
-
I have an error when using mbedgt.
I have a NRF51_DK board and I use Windows OS
- Test with mbedls: `mbedls --json`
![capture2](https://cloud.githubusercontent.com/assets/15735613/19304244/0a03b5f6-…
-
According to the main README file this project should work with the nRF51822_QFAA rev 3 chip.
I have downloaded the last version of the project 0.8.3 and I have found several thins that confuse me ab…
-
If I clone the repo into the Arduino hardware folder, and try to compile a blank sketch with any of the boards I get an error about utoa not being available
It looks like its used here
https://githu…
-
Newlib's printf() seems to allocate a huge buffer on the stack, that requires more than 1KiB stack space. Crashes with a 512B stack.
Solutions:
- Use a bigger stack, not great to use so much space ju…
-
# Python API:
`flasher.FLASHERS` -->
```
>>> flasher.get_available_flashers()
['mbed', 'atmel']`
```
new:
```
>>> flasher.get_flasher('mbed')
```
`flasher.SUPPORTED_TARGETS` -->
```
>>> flash…