-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…
-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…
-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…
-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…
-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…
-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…
-
```
The need is to use the SSD1306 128x64 OLED display with support for SoftI2C,
for instances where the SDA and SCL pins are used up.
The SoftI2C library is already available at
https://github.co…
-
Hi, habe gerade dein Projekt entdeckt und wollte mir das ganze Nachbauen. Einen Sonoff Basic hatte ich hier noch herumliegen :)
Ich bekomme allerdings folgenden Fehler beim compilieren mit VS:
`…
-
Hi, not sure if this is the right way to ask you a question, but it looks like I screwed up when ordering the OLED boards for this project. I got this: https://www.mouser.ca/ProductDetail/Adafruit/444…
-
I am working with two Heltec LoRa 32 (v2) boards
Programming on Arduino IDE 1.8.13
heltec.h (ESP32 Dev-Boards library) is version 1.1.0
Running the example found under `heltec ESP 32 Dev boards > …