-
Trying to test OneWire on raspberry pico W in Arduino IDE 2.0.3. Appears to be a problem others are having when downloading code the IDE hangs with an uploading message that doesn't go away. https://f…
-
Hello, when I restart the Raspberry PI, I do not get any data in SignalK from my temperature sensors which are connected via OneWire. Only when I separately restart SignalK again, the data is displaye…
-
...this is a tentative issue title, until we figure out what the underlying problem should be. Let's see. ;-)
I'd like to be able to use Pimoroni's sensors, and they have lots of libraries for them…
-
### Describe the issue you are experiencing
Trying to setup 1-wire sensors using an Intel nuc and a DS9490R USB adapter.
The devices show up under /sys/bus/w1/devices but the w1_slave file is miss…
-
### Target name(s)
ESP_WROVER_KIT
### Firmware version
1.7.4.285
### Was working before? On which version?
_No response_
### Device capabilities
System Information
HAL build info: nanoCLR runn…
-
**Hardware:**
- Pump model NO54154 Paris
- 4 wires
- PCB type V1
- Level shifter type -TXS0108E
**Software:**
- Version: Works 4W_2022-08-03, does not work on new Unified FW
**Your mes…
-
ussl not in board ARDUINO_NANO_RP2040_CONNECT in port rp2
Firmware: ARDUINO_NANO_RP2040_CONNECT-20220618-v1.19.1.uf2
Version: (sysname='rp2', nodename='rp2', release='1.19.1', version='v1.19.1 on 2…
-
Hey Rob, or anyone out there. Thank you so much for your effort in creating this library!
I would like to show a float generated by a temperature sensor. The digits are showing correctly but the de…
-
Hello,
Is it possible that Dallas Onewire communication be added?
I'm interested in using Tinygo with a ds18b20 temperature sensor.
All the Go libraries I've found depend on a host driver/OS.
…
-
We continue here the discussion of development/debugging the w60x port in branches **w60x** and **w60x_r**.