-
Hi Mike
Firstly excellent work here and some great code. I am looking at ways we might get a permenant WSPR -> SondeHub integration in place with Mark et al (https://github.com/projecthorus/sondeh…
-
On 7/11/22 23:25, Xipengxiao wrote:
> 3. In Section 4.4 for Fragmentation Header, should the success rate for
> “Atomic” be 0% for both UDP & TCP? See the picture below. Does
> this mea…
-
Currently When configuring Faucet with Chewie for MAB, Faucet forwards only dhcp packets to the nfv port and chewie also filters out only dhcp packets (opens up a socket that will only listen to dhcp …
-
**Important notices**
Before you add a new report, we ask you kindly to acknowledge the following:
- [X] I have read the contributing guide lines at https://github.com/opnsense/core/blob/master/…
lfitt updated
2 months ago
-
**Describe the bug**
As discussed on Tweakers: https://gathering.tweakers.net/forum/list_message/79791476#79791476 and further
I had EMQX do a trace log for the SmartEVSE client (and setup an auto…
-
Currently the `WriteContext` we pass to filters on `write` contains this `from` field containing the ip address of the sender https://github.com/googleforgames/quilkin/blob/main/src/filters/write.rs#L…
-
Upgraded from 22.03.0-rc1 to rc4 with fresh config on my Archer C7v5 and I noticed my speedtest dropped from 500/100 to 240/100.
Also occur on my Deco M4Rv2 with Openwrt 22.03.0-rc4 firmware installe…
-
**Describe the bug**
On a live capture, if the filter is invalid, dumpcap exits - however not caught. The library just sits and spins.
In my case, I specified `multicast` on a MacOS loopback inter…
-
I was trying to port https://github.com/iovisor/bcc/blob/master/examples/networking/http_filter/http-parse-simple.c using libbpf
I thought the following code should capture TCP packet, but it didn'…
-
### Before creating an issue, make sure you've checked the following:
- [X] You are running the latest released version of k0s
- [X] Make sure you've searched for existing issues, both open and cl…