-
This is a general discussion about the current [CONTRIBUTING.md](../blob/dev/CONTRIBUTING.md) with the aim of exploring the contributor consensus before suggesting any amendments. I feel that this nee…
-
If I try to copy a file to the pyboard over a UART using rshell, then characters get dropped.
For this test, boot.py contains:
```
import pyb
pyb.usb_mode(None)
uart = pyb.UART(6, 115200, timeout_ch…
-
This is continuing on from the discussion on the GRBL limit switch issiue.
https://github.com/gnea/grbl/issues/96
Hers where i got to on the limit switch wiring.
![input](https://user-images.gith…
-
~~Did you ever try out to specify the upper 1.3V dvfs operating points the 'usual' way: `11300` vs. `1100`?~~
dvfs_table {
compatible = "allwinner,dvfs_table";
max_freq = ;
min_freq = ;
…
-
Build information:
```
cd source/git/ast/SoapyAirspy/
git pull
cd build
cmake -Wno-dev ../
make
sudo cp libairspySupport.so /usr/lib/x86_64-linux-gnu/SoapySDR/modules0.7/libairspySupport.so…
-
Hello! I've try to porting to the Allwinner F1C200s SoC device.
I've successfully compile kernel module and load it on target system, but i can't see `espsta0` interface in `ifconfig -a` output.
K…
-
### Mouse / peripheral model and version
Rog Strix Evolve
### Armoury Crate Screenshots
SORRY)
### USB Details
+++++++++++++++++ Device Information ++++++++++++++++++
Device …
-
I bought a controller from Aliexpress in the 'classic' form factor (https://www.aliexpress.com/item/33003742445.html), with an Artery AT32F413RCT7 on the mainboard, and two sensor boards, one of which…
gnbl updated
6 months ago
-
**Describe the problem you have/What new integration you would like**
I've got my hands on the M5Paper from M5Stack and would love to use the e-ink touch display to render switches and buttons …
-
![gen-l_diagram](https://user-images.githubusercontent.com/2018522/37561708-94a90c06-2a23-11e8-8e97-48756d7fa76f.jpeg)
here is a rudimentary drawing of how im using my drivers on an MKS-Gen L V1.0 bo…