-
This is what happened at startup (you can see that the `info` command was sent):
```
Welcome to DragonRealms (R) v2.00
Copyright 2016 Simutronics Corp.
All Rights Reserved
--- Lich: repository activ…
-
```
ARducopter Ver. 2.0.47 hexa plus mode.
but back motor(port2) ESC doesnot initialized.
At first time I thought my Turnegy plush ESC had problem. I changed it. It
occured same problem just beep sun…
-
```
Iam using turnigy plush 25amp speed controller with turnigy 1100 kva motors,
and a hobby king HK-7 tr AND rx system 7ch mode 1
When connect any motors to the 0th pin of the APM, it starts beepin…
-
```
Iam using turnigy plush 25amp speed controller with turnigy 1100 kva motors,
and a hobby king HK-7 tr AND rx system 7ch mode 1
When connect any motors to the 0th pin of the APM, it starts beepin…
-
```
Iam using turnigy plush 25amp speed controller with turnigy 1100 kva motors,
and a hobby king HK-7 tr AND rx system 7ch mode 1
When connect any motors to the 0th pin of the APM, it starts beepin…
-
```
I've lots of ESC's lying around whilst I was building my octo (which turned
hexa). Have been flying happily with SimonK firmware for a while (never used
bell-motors)
Steps followed
1a.Upload la…
-
I get the following warning while compiling: `WARNING 6 : DATA SPACE MEMORY OVERLAP
AT ADDRESS: 0020,(BLHELI,BLHELI)`. Is that normal?
I only ask because the firmware that I built doesn't app…
-
#### Description of issue
Apparently simple mobs that are picked up can fit inside Bibles secret storage.
#### Difference between expected and actual behavior
There's a crab inside the bible.
#### …
-
I think you should have either (a) a Markdown document in the repo or (b) a repo wiki page that documents Plush genomes and Push programs. My inclination would be towards the former since then the doc…
-
```
ARducopter Ver. 2.0.47 hexa plus mode.
but back motor(port2) ESC doesnot initialized.
At first time I thought my Turnegy plush ESC had problem. I changed it. It
occured same problem just beep sun…