-
The finger print sensor is seams to communicate but things like ethernet shields and lcds don't work at all.
-
Please add our new Romi32U4 library to the library manager:
https://github.com/pololu/romi-32u4-arduino-library
Thanks!
-
Hi.
Can you please add the following library to the library manager?
https://github.com/pololu/pololu-led-strip-arduino
Thanks,
Ryan
-
Should this code work with the Maestro 24? Pololu's docs all state each channel needs to be enabled before using and that once enabled the yellow LED should flash twice, but I don't see anything in yo…
-
I have noticed that this library is not your own work and it is a plain copy of this https://github.com/pololu/vl53l0x-arduino
You do not have the right to apply your own licencing too it without acc…
-
Input from the battery board, output are the main voltage rails.
-
Hi Kris, Kevin down in Tasmania. I am playing with a BNO055 (Adafruit unit, with wiring for power and SCL,SDA only) and your BNO_055 Nano Basic AHRS code with a Mega board.
Had some compile issue wh…
-
Ditch Solar charging hopes
use 6AA's (https://www.pololu.com/product/1155/specs)
change solar charging position to USB connection position.
use this 5V step down regulator: https://www.pololu.com/p…
-
I have been working a bit to set up the MinIMU-9 v3 Gyro, Accelerometer, and Compass (L3GD20H and LSM303D Carrier) with Arduino and Python. After some time I now have the correct versions on Python an…
-
Bought an Eachine Chaser 88 with a PIKO BLX clone - dumped the original settings, flashed the board to 3.1 and got the 'acc missing' code.
So I ordered an original PIKO BLX, flashed it with 3.1.3, …