-
I need to connect to a VPN_1 with similar configuration as another VPN_2, however, I can successfully connect to VPN_2 (however, I need to remove a route), but it fails to connect to VPN_1. I can conn…
-
I am using openfortigui and works just fine... except with skype.
When connected to my VPN messages hangs forever and calls do not start.
If I disconnect messages are sent.
Here follow my profi…
-
Hi, my xl2tpd with freeradius client and pptp on Alpine dist not working (I checked the settings on ubuntu and its working)
* Running in docker.
I got this log on the Alpine docker:
```
xl2tpd[…
-
There's no documentation for how to setup the username and password for clients to connect with, and I have been struggling to figure this out
as per the documentation my `options.sstpd` has requir…
-
Hi @seud0nym,
Sorry to hijack this issue, looks like I also have a problem when trying to set up VLANs.
I've just tried running VLANs from the Local Network screen however it disconnects my WAN …
-
Hi all,
I'm configuring SoftEther VPN Server (Developer Edition - DE) to work with OpenVPN Client 2.6.git using TLS 1.3 handshake protocol, but not work. Same configuration but when used with Stable …
-
**server :** centos 7.5, 7.9
**openfortivpn version :** openfortivpn-1.17.0-3.el7.x86_64
**test command :** openfortivpn -c /etc/openfortivpn/config --persistent=1 -v --pppd-log=/usr/local/src/forti…
-
I was using OpenFortiVPN very successfully on my laptop running Ubuntu 22.04.1 to connect to a Fortigate VPN. Recently, after my laptop finally kicked the bucket, I decided to get a Raspberry PI 4…
-
## 1.关于你要提交的问题
昨天编译了master最新代码，与2022.10.08号编译的对比，启动后空载内存占用由100MB左右变为了300MB左右，编译配置没变。
#### 此内存占用情况是否正常？
#### build 2022.10.08 @ OpenWrt R22.9.1 / LuCI Master (git-22.279.28429-0cb5c5c)
```
ro…
-
设备信息：
- cpu: N5105
- 网卡: I225-V
- 虚拟: ESXi-7.0U3 网卡硬件直通
实际网卡顺序是对应物理口从左到右为 eth0, eth1, eth2, 对应 mac 是 ad:44, ad:45, ad:46。
但是新固件编译后实际表现把 eth1 和 eth2 搞反了，所以我前天用了后 pppoe 拨号失败，刚刚看 mac 地址确认搞反后 wan 口…