-
I am trying to install mosca on raspberry pi 3 model B+. Below is the error on terminal and an attached log file
npm ERR! Linux 4.9.59-v7+
npm ERR! argv "/usr/bin/node" "/usr/bin/npm" "install" "m…
-
The new matplotlib needs python 3 so the dependency check fails and install ends in error. I encountered this while trying to install on a raspberry pi zero w.
I worked around this by manually in…
r-a-i updated
5 years ago
-
Operating system: Raspberry Pi OS Bullseye
Python version: 3.9.2
Pi model: Pi Zero
GPIO Zero version: e.g. 1.6.2
Pin factory used: RPiGPIO
RpiMotorLib uses RPiGPIO as backend. Pins 20 and 21 ar…
-
Downloaded latest MotionEyeOS for regular Pi. Extracted and burned to micro-sd for my Raspberry Pi Zero. I have wifi dongle and camera attached. Applied power. Using HDMI monitor. Boot starts. For som…
-
I already updated pip. Thanks.
Note:
sudo pip install cryptography
says requirement already satisfied
writing manifest file 'src/cryptography.egg-info/SOURCES.txt'
/tmp/pip-build-en…
-
* Doc you were trying to follow: https://coral.ai/docs/enviro-board/get-started/#2-install-the-python-library
* Your host OS: Raspberry Pi OS 32 bit on a Raspberry Pi Zero W (latest stable image) and…
-
I have an issue when sending problems to the Raspberry. I have to click the button at the app many times until it gets displayed to the leds. I started troubleshooting and added a print in the BLE ser…
-
I have tried just about every option to get my MotionEye camera running off of a Raspberry Pi Zero loaded into BlueIris so this camera stream can sit along with my other cameras. After hours of head-p…
-
Creating the pi-webrtc systemd service file, the command line to execute pi_webrtc has a parameter "--uid". Do I set this to the device uuid in the mqtt config, or do I use the Alias?
Also, is STUN/…
-
Hello,
is it possible to make a port for Orange Pi (Zero 2) or similar?
Orange Pi Zero 2 has HDMI and 3.5mm video/audio output.
Thank you.