-
I recently purchased an RSP1A (NOT a clone) and it works great.... for a while.
I have been testing it all and found that after a while, SDRangel just stops talking to the RSP1A and no signals are …
-
**Description of the issue**
While processing APT and with the "Plat Audio" option checked, I still do not get audio out to my speakers.
**Hardware (SDR/PC/OS)**
RTL-SDR V3, Airspy Discovery HF+
…
-
I am using a Fitipower FC0012 tuner and trying to capture traffic from honeywell door sensors (protocol 70)
Here is my conf file
```
output kv:/rtlData/rtl_433.log
frequency 395M
convert …
-
### Type of request
Bug
### HAOS version
Home Assistant 2023.10.3 Supervisor 2023.10.0 Operating System 11.0
### wmbusmeters version
1.14.0
### Your message goes here
Hi,
I've problem after mi…
-
When I try installing URH with "sudo python3 -m pip install urh" i get an error.
The first time I tried installing I was missing Cython, after installing it I tried again and now I get another error…
-
My energy provider decided to swap out my meter today, replacing my C1A3B Itron with a G5R1 Itron. I don't see it when I spin up a broad listener, and it looks like G5R1 uses both 900 MHz and 2.4 GHz …
-
**Description of the issue**
SatDump window loads, but GUI is a black screen.
**Hardware (SDR/PC/OS)**
Ubuntu 22.04.3 LTS
Intel Xeon E5-2670 2.60 GHz x2
128GB RAM
Tried with:
RTL SDR V3
No…
-
Is this task feasible using plugin or we should code cpp converter and pipe std output there and to cansend?
mpuz updated
7 months ago
-
### Description
The `rtl_433` application sends duplicate messages from a [Fineoffset-WH0290](https://ambientweather.com/pm25-wireless-outdoor-particulate-monitor) sensor to mosquitto, where only a s…
-
Is it possible to add the IQ Correction option?? I have a DC Spike that makes imposible to decode any signal.