-
I have an issue similar to that one IO Error when trying to send the job to Smoothieboard (https://github.com/t-oster/VisiCut/issues/359)
I have an Arduino One with GBRL 1.1 with the same bootload…
-
### Is your feature request related to a problem? Please describe.
Marlin has experimental support for `SPI_ENDSTOPS`, which negates the need for hardwiring a wire from DIAG0 to end stop pins. Howeve…
-
```
What steps will reproduce the problem?
1. I configured the coordinator in this way: I opened XCTU and I updated the
firmware to Coordinator API, after I changed the PAN ID to 0; I could not
chan…
-
```
What steps will reproduce the problem?
1. I configured the coordinator in this way: I opened XCTU and I updated the
firmware to Coordinator API, after I changed the PAN ID to 0; I could not
chan…
-
Hello,
there is know W5100 erratum which causes that socket.cpp -> EthernetClass::socketSendUDP() never returns. It happens during asynchronous bi-directional UDP communication when one packet is b…
-
I am trying to use this with an Arduino Uno and not having to much luck, I might have something out of order with the communication. If I use the Serial monitor, I can get this to work.
-
I'm running RatRig V-Core4 500 with a Orbitool board. I keep getting lost communication error. I've tried multiple toolboards, USB pcbs, and cables. I ordered 3 toolboards, so I had 1 for IDEX an…
-
Hi,
I have to implement basic driver for these generators in LabVIEW. Do you have some manual with the commands or from where have you got them? I can take if from your code, but it would be easier i…
-
I tried motor driver using Arduino simplefoc. When I set control type to "velocity openloop" or "angle openloop", it runs well. But for "velocity" and "angle" type, the motor cannot go to the set poi…
-