-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
After successfully flashing sonoff pow origin/elite powr320D it enters a boot loop, just constantly rebooting be…
-
### PROBLEM DESCRIPTION
The image button set_src function only works if the first argument is lv.IMGBTN_STATE_RELEASED. If lv.IMGBTN_STATE_PRESSED, lv.IMGBTN_STATE_CHECKED_PRESSED or lv.IMGBTN_S…
ukoda updated
10 months ago
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
I get occasional restarts on the device with `RestartReason` = `Hardware Watchdog`.
I use the device as a shutt…
-
### PROBLEM DESCRIPTION
an installed piezo buzzer is setup as Buzzer. If send Command Buzzer 2,3,4 i can recognize super silent knocks. but no beeps.
When set this Buzzer/Port as PWM i can conto…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
16:11:34.955 CMD: Mem1=usbnas.loc/cgi-bin/mocha.cgi
16:11:34.959 MQT: stat/zb1/RESULT = {**"Mem1":"0.000"**}
…
-
### PROBLEM DESCRIPTION
I build development#d7af0ae0772b187700eaeabcd7bdf53c7ddfe7c4 with `#define USE_SHUTTER_ESP32` for my Sonoff dual R3 and found out that Home Assistant add my device as two rel…
-
### PROBLEM DESCRIPTION
On ESP32 using all 3 UART, 2 by tasmota native drivers (modbus and PMS5003) and the last by Berry the serial console (disabled to use uart0) restart. Other strange effects…
-
### The problem
Have tasmota on a zbbridge pro. When in non tcp mode it works fine, pairs devices, everything as it should.
Then I reconfigure it as TCP to use with ZHA, add the integration, conf…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before…
-
### PROBLEM DESCRIPTION
One of my Shelly 1PM flooding the console with errors like
```
12:05:22.820 CMD: Serial buffer overrun
12:05:22.829 CMD:
12:05:22.887 CMD: Serial buffer overrun
12…