-
Hi，
Using the latest branch test, the configuration file of WHITECAT-ESP32-N1 was used. Several modifications were made: the second group of SPI was modified, and the three DIO mapped GPIOs were also…
-
**Describe your question or issue**
Hi
Finally I retried the sample program for OTAA on Orange LiveObject and I have the same problem I have on my projects : Payload are not sent or disappear be…
-
Hi rgot-org,
first you make grate job with your lib.
i have a problem with the heltec wireless stick connection to the ttn:
my code in from ino file:
#include
#include "TTN_CayenneLPP.h"
…
-
Hi
This is not really an issue, but I find the use of RadioHead a bit of overkill for such a simple protocol, and I'm also concerned that potentially RadioHead adds additional data to the start and…
-
What's the level of maturity of erpc 1.7.3 with Zephyr? I'm getting many errors when trying to compile with Zephyr 2.2.99 (see below).
`FAILED: CMakeFiles/app.dir/src/erpc/erpc_c/port/erpc_threa…
-
Hello folks,
very neat project I have just started to use PlatformIO so please apologies if this is obvious.
Board:
[LILYGO® TTGO LORA V1.3 868Mhz ESP32 Chip SX1276 Module 0.96 Inch OLED Screen …
-
Hi,
i try compile example application for RAK811-H from app_RAK811 folder.
Compiler log:
mkdir _build
CC adc-board.c
CC board.c
CC sx1276-board.c
CC timer-board.c
CC rtc-board.c
CC i2…
-
Hi
Could anyone tell if the TCXO control on the B-L072Z-LRWAN1 Discovery board by PA12 is implemented? If so, am I free to use any GPIO for this function?
BR
Gilberto
-
When I run the app with a Dragino LoRa/GPS HAT, the SX1276 is detected, but the gateway values remain at 0. Are these values the MAC address from the ethernet port? I'm running this on an RPI A+ wit…
-
**Is your feature request related to a problem? Please describe.**
It's not currently possible to put the modem in Implicit header mode which is useful for low latency applications where the payload …