-
If have some issues with my ESp32-Radio design and need advice. Designed a PCB 2 years ago (you can find in this [post](https://github.com/Edzelf/ESP32Radio-V2/issues/61)). However my wife decided to …
-
Would any of your drivers support this board? https://www.olimex.com/Products/Modules/LCD/MOD-LCD6610/open-source-hardware
samuk updated
2 years ago
-
Changing between screens with different layouts leaves what was previously drawn on the screen in the background. I could be wrong about this but I believe this would be because we aren't filling the …
-
Hi Fabrizio,
I'd love to attach one of my 7 inch 1024x600 TFT displays to my VGA32_1.4 and utilize the native resolution, but it seems I can't :-(
Unfortunately, there is no corresponding predef…
-
-
Hello:
I own a Nucleo-64 STM32F446RE board and a SPI TFT LCD (ILI9341) from Waveshare.
I have been trying for over a month to get my board to display an FFT output and was finding it impossible to…
-
My ST7735 works perfectly. So does my SD module. But when I use them together on my Mega2560, the display blanks out and the SD init() says error on initialization. (They share the usual MISO, CLK, et…
-
Config is good.
However without knowing the hardware configuration the user would have to reverse engineer what hardware you have. Meaning they would already have the ability and knowledge to do thi…
-
After having finished a print, taking out the SD card, uploading a new file and reinserting it and going to the print dialog, the screen turns black. This doesn't always happen, but about 50% of the t…
-
Hi guys,
i tried getting this to run, but i just wouldn't work and crash/reboot. First i tried the whole setup with the mp3 board, but as i had to look for errors (they were different most of the t…