-
-
| | |
|--------------------|----|
| Bugzilla Link | [PR36895](https://bugs.llvm.org/show_bug.cgi?id=36895) |
| Status | NEW |
| Importance | P enhancemen…
-
I want to test throughput on multi-hop router path.
My plan is using several PCs, the first one as the source, last one as the destination，those between them as the routers, connect them all and then…
-
Run PTB example code with mkldnn on local machine. After several iterations(55 iterations) of high throughput(25-40), the throughput decreases gradually and arrived to 8.6(150 iteration).
-
Scenario1 - Transport TCP stream , we are using the MPTCP kernel + shadowsocks and is working fine.
Scenario2 - To transport the UDP traffic on multipath, we choose to go with following design
(Se…
-
```
What steps will reproduce the problem?
1. iperf3 -s -V on srv1;iperf3 -c srv1 -V on srv2; (Note srv2 has just been
rebooted.)
2. Note the TCP throughput. On my setup (10Gb link) it shows about 9.…
-
```
What steps will reproduce the problem?
1. Create and link 2 switch nodes
2. Create and link a single Layer 3 node for each switch (router tested)
3. Generate traffic of some sort (RJ45 connected …
-
```
What steps will reproduce the problem?
1. Browse to http://www.rdasia.com/five-medical-dramas
2. Activate iReader and use the Print option
3. Check Chrome's print preview
What is the expected out…
-
```
What steps will reproduce the problem?
1. Browse to http://www.rdasia.com/five-medical-dramas
2. Activate iReader and use the Print option
3. Check Chrome's print preview
What is the expected out…
-
```
What steps will reproduce the problem?
1. Create and link 2 switch nodes
2. Create and link a single Layer 3 node for each switch (router tested)
3. Generate traffic of some sort (RJ45 connected …