-
I'm trying to install openipc-hi3518ev200-lite-8mb.bin, after flashing the error is:
```
Wrong Image Format for bootm command
ERROR: can't get kernel image!
resetting ...
```
Flashig proce…
-
#### Description
The SONiC couldn't load the USB console switch, no `ttyUSB*` device created under `/dev` directory.
#### Steps to reproduce the issue:
Suddenly happens on our testbed, not …
-
I tried several instructions (also https://forum.pine64.org/showthread.php?tid=6814) for configure boot via PXE on Rock64 - no luck :(
Have issue with "UDP wrong checksum":
```
DDR version 1.13 201…
-
I am not able to compile this to my arduino. I had someone at my work help me and it says it complied and is on the due, except I can't get it to link to lightburn or lasergrbl. It has the com port …
-
Chrome browser in Mac OS 13.5.1
I'm using a single Pico board that's working as expected with USB mouse connected (axis, all buttons, wheel), however, when i connect an 8BitDo SN30 Pro gamepad in P…
HVR88 updated
11 months ago
-
### The problem
Every few days, the ZHA integration stops working and displays the status "Failed to setup". If I try to Reload the integration, it will come good after multiple attempts, but I susp…
-
Hi Nik, I'm having a problem with a T-Display-S3-Amoled (v1 I think) project I'm working on, and I wonder if you can help, given your knowledge of the rm67162. The project uses TFT_eSPI and your ver…
twj42 updated
1 month ago
-
I am using the CUAV V5+ flight controller and running PX4 version v1.12.3 and px4_fmu-v5_rtps on it. I have connected the flight controller to my Ubuntu 20.04 laptop via the USB port and by the DSU7 d…
-
**System Information:**
- Model: [Acer Predator G3-571]
- Distro: [Nobara Linux 37 (basically a tweaked fedora 37)]
- Kernel: [6.2.6-201.fsync.fc37.x86_64 (64-bit)]
- DE/WM and Display Manager…
-
If I run any task from vscode for example 'Build Hellen NB1' it always fails after the bootloader compilation with the following error:
Creating blbuild/fome_bl.list
text data…