-
The big metal lathe isn't connected to an outlet since we moved to the new space. It's motor runs on 3 phase ac and it is my understanding that the peek current draw during startup would overwhelm the…
-
Hello,
I'm impressed by this project and wish to build this clock. The IN-12 direct drive variant.
But stuck at the BOM + shared gerbers and schematic differences.
There were some which I was a…
-
Sorry, one last issue The CNC Xpro has a built-in PWM Converter that outputs a 0-10v signal which is use to drive my kmb spindle there's also a relay that can be linked to the enable pin. I cannot see…
-
### System information
- **Have I written custom code (as opposed to using a stock example script provided in TensorFlow)**: No
- **OS Platform and Distribution (e.g., Linux Ubuntu 16.04)**: Linux, …
-
Hi terjeio,
I have flashed the above board but then get the above error when attempting to connect to UGS.
I am not sure if there is anything specific to the flash process but there are no error…
ghost updated
2 years ago
-
I'm sorry if it sounds a stupid question, but I'm very new to C++ development. Since I'm on the mac I couldn't follow the linux commands provided at [the download page](http://h5cpp.org/download/). I …
-
In #201 you replied to the question
> After setting ffmpeg.RootPath = "/usr/lib/x86_64-linux-gnu/"; and removing the avcodec-58.dll
with
> This is a too rare scenario as that I would call thi…
-
Hi Arthur,
I'm using an RK3318 box with Linux (4.4 kernel), and have successfully compiled the driver and service, with systemctl successfully loading the module and launching the service.
I have …
-
I wrote a module for Futaba M202MD07HB VFD serial text screen.
When I call it from the `init.lua` it works fine. But trying to do the same manually from the command line causes a reset.
### Actual…
-
Hi,
I tried compiling netmap with the external i40e versions (2.4.6, 2.12.6, 2.13.10, 2.14.13, 2.15.9, 2.16.11) against all the Ubuntu Kernel versions 5.8.0-XX-generic and 5.11.0-XX-generic.
The…