-
The original MKS TFT28 supports wifi using the MKS HLK-WIFI module.
Is this supported with your firmware?
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Device Type : Lolin V3 (ESP8266 Wifi);
Shorted GND and Pin 12, 14, 15 Not Working. But Output Mode Work;
Whats Wrong ?
````Typescript
let board = new Board({ debug : false, repl : false, por…
-
Hello everyone, when I tried to run the example in https://docs.arduino.cc/tutorials/uno-r4-wifi/rtc#Periodic-Interrupt, I found some errors in it.
In order to make the code run correctly, I made m…
eMUQI updated
6 months ago
-
### Hardware:
Board: Lolin32 Lite
Core Installation version: 1.0.6
IDE name: Platform.io
### Description:
I would like to create a wrapper class around the wifi class to provide ac…
-
### The problem
One of my devices does not boot (or is in bootloop) after uploading the following code:
Unfortunately I also could not get serial log working.
The problem is on the addition of …
ksya updated
2 months ago
-
heya,
i successfully used your syslog component before on a dingtian board (ethernet only) by using the known hack of just commenting out the if(WiFi.status() != WL_CONNECTED) line.
"some" months …
-
Hi. I have this Board
Mega2560 + WiFi R3 ATmega2560 + ESP8266 32Mb di memoria USB-TTL CH340G. Compatibile per Arduino Mega NodeMCU Per WeMos ESP8266
https://s.click.aliexpress.com/e/oDaKQyey
I can …
-
### Board
Adafruit ESP32 S3 Feather
### Device Description
Freshly purchased from Adafruit.
### Hardware Configuration
There are two buttons attached to pins 12 and 13, and commonly grounded to …
-
### Hardware
ESP32
### Firmware version
v2.4.6
### Application version
v2.4.6
### What happened? What did you expect to happen?
Flashed Firmware to the ESP and done all the setup via the ESPs W…