-
LuCI shows RX Rate / TX Rate as:
54.0 Mbit/s, 20MHz
6.0 Mbit/s, 20MHz
If I set `legacy_rates` to `1`, TX Rate drops further down to 1.0 Mbit/s.
Speedtest on my phone seems to verify this, I ge…
-
Build logs:
```
Compiling compiler_builtins v0.1.82
Compiling proc-macro2 v1.0.47
Compiling quote v1.0.21
Compiling unicode-ident v1.0.5
Compiling core v0.0.0 (/home/mixedcase/.ru…
-
Newer Wi-Fi routers implement WPA3 and can offer stations a mixed WPA2/WPA3-Personal security choice.
VintageNet WiFi fails to report the presence of WPA2 security in this case.
On the recent B…
-
**Describe the bug**
When trying to enable WiFi support on the Espressif line of boards, the build always fails because of mbedtls errors in the espressif hal library.
This seems to be across all …
-
hi folks,
I tried to use wpa3 with my surface 6, the surface-kernel, wpa_supplicant/iwd and networkmanager, but I could not get it running. Is wpa3 a matter of the device driver or hardware based? …
-
Just like in the subject the gt app returns error string _Failed to enable gadget Invalid parameter_. The error code **USBG_ERROR_INVALID_PARAM** is being returned from method _usbg_enable_gadget_ in …
-
I turned on mixed WPA2/WPA3 mode on my access points for giggles and ended up with the following alert:
```
META INFORMATION
ssid
bssid
encountered_security
WPA2-PSK-UNKNOWN-CCMP
channel
…
-
### Hardware:
Board: ESP32-WROOM-32 Dev Module
Core Installation version: 1.0.1 (installed using board manager feb/23)
IDE name: Arduino IDE 1.88
CPU Frequency: 80MHz
Flash Fre…
-
MTU cannot be set to more than 1500
When configuring the ad-hoc based mesh network of Batman adv, i need to use the command:
**sudo ifconfig wlan0 mtu 1532**
However, I found that when the MTU is s…
-
### OS
Windows
### Operating System version
10
### Visual Studio Code version
1.70.2
### ESP-IDF version
1.5.0
### Python version
3.8
### Doctor command output
launched this command via the…