-
# Generation config
I know it has just been added so it is normal! But the following are missing (and are pretty intuitive w.r.t our other objects such as configs, processors etc):
- [ ] `Genera…
-
**jquery version:**
jquery-3.6.0
**jquery-confirm version:**
v3.3.4
**I'm submitting a ...** (check one with "x")
[ ] bug report
[ ] feature request
[X] support request
**Current behavi…
-
### Zig Version
0.10.0
### Steps to Reproduce and Observed Behavior
I have a GPIO blink program written for the RPI zero/A+ which I know successfully blinks the light. Due to this being a bare meta…
-
I'm using Nuxtjs and currently I can get it to work in dev mode but when I make a production build it doesn't show the first (index 0) slide. Slider works fine and other slides are showing but not the…
-
For bug reports, the following information can help speed up the process. Please
describe the bug that you have found and what you would expect to happen
instead.
### System
OS: Linux
Version…
-
After discovering that "Erika to Satoru no Yume Bouken" uses uninitialised N163 Sound RAM as wavetable data, I have been testing the Sound RAM initialisation in various emulators. The test ROM I am us…
-
### Description
The inverter is intermittently stuck in lockout after pressing the 'ready-to-drive' button.
### Steps to reproduce
1. Connect the VCU to the motor test rig (CAN and throttle pedal…
-
I have the adafruit 4650 OLED display working on the RP2040 using circuitpython along side one working on an RP2040 using Micropython, each using its prospective driver. Both work nicely with the exce…
-
If a hardfault occurs during early startup, before the `leds` structure is initialized, via `ledInit` the code which attempts to enable LEDs in the hardfault handler will fail and cause writes to unin…
-
### Steps to reproduce
1. Set up an input with a valid Australian phone number: Example value: 0412 345 678
2. Initialize phone input with "au" for the initialCountry and separateDialCode = t…