-
@jonmagic is an english version of the robot hardware assembly anywhere? I took a quick look but didn't see it.
1. we should also make a parts list. if you share yours I'll probably order a bunch of…
-
Hello!
I have an arduino Mega 2560, I would like to know the correct pin to control the servo. I am already able to control my machine´s stepper motors for X and Y axis but not my servo. I changed th…
-
I bought a SKR1.3 with 2208 drivers for my CR10.
There is an error TMC connection error. Will take instructions from the display but make a terrible noise when moving on the z-axis towards the bed.…
-
Hello,
No issue with your code, just interested in how the KCM-B166s are holding up?
-
I was messing about with "4_Axis_SPI_CNC" code and my laser galvo/stepper setup.
The ESP32 now seems to be stuck in a boot loop. Keeps throwing errors.
My guess is I managed to mess up GRBL setting…
-
Hi,
I have got a strange and annoying issue In my printer. I have a self built core XY type printer with
- BTT SKR 2 REV B
- TMC 2226 ON X,Y AND E0
- A4988 ON Z
- REPRAP DISCOUNT FULL GRAPHIC C…
-
I am using two K8200 printers, one with the standard nozzle (0.5 mm, drilled to 0.6) and one with a E3D V4 Hotend (0.4 mm). The extruder (gears similar to Wade's) are the same, just different stepper …
-
Hello All,
Running a Due+RAMPS+DRV8825 setup. I hit a wall with the DRV8825 in that the STEP signals do not follow TI's requirement of 2us min value. As such, the Y axis motor was not moving at all, …
-
Hi i want to apologize that i am creating this as an issue.
But i have a question. I am trying to use your firmware (from master branch), with small modification (changed only PINs and small modifica…
-
Hola, me gustó mucho su modelo de impresora y decidí llevarlo a cabo, una vez montada y puesta en funcionamiento no consigo configurar el firmware para que imprima, los motores solo hacen ruido y piti…