-
Some users report that they see reboots with 2.1.11, looking for input on how often. Please include information:
- Country: [e.g. Norway]
- Meter: [e.g. Aidon]
- Encryption enabled [yes/no]
- …
-
I am getting this error:
Aidon meter with Rj12 (activated) NodeMcu V3. Wiring as suggested!
[17:31:09][E][uart_esp8266:167]: Reading from UART timed out at byte 0!
[17:31:09][E][uart_esp8266:16…
-
I get wrong values on power and current, I havn't measured what I use now, but I'm closer to 1700w than 17w
Using tibber pulse with MQTT
```
2022-10-03 15:23:00.486 DEBUG (MainThread) [custom_compo…
-
I just installed the AMS meter and it worked great!
Connected to an Aidon meter, with only a RJ45 cable.
I tried to turn off the "Power saver" under Wifi settings and the daily hour/day usage was …
-
Hi,
Lately I have been getting more and more checksum errors. Normally it happens a couple times every minute or so.
Maybe it is an obvious HW failure or is it something else? I have upgraded to …
-
The following Measurment scenarios are included as example:
Reference data:
- [x] ReadingType
- [x] ReadingQualityType
Scenario:
- [x] UsagePoint
- [x] Reading (kWh and kVAR)
- [x] Interva…
-
Look json.ld and cim part 9
Add Metering (EnergySeries and Events)
Add Asset EndDevice
Add UsagePoint
Add Event and EnergySeries
Example:
EnergySeries:
```
…
-
**Describe the bug**
Number in the diagram is displayed with same color as the bar.
**Expected behavior**
Number should be white when displaying inside the bar.
**Screenshots**
![WrongColor](…
-
ESP32 configured as Lolin D32. FW 2.1.12 and 2.1.14.
Aidon 3p IT / NO1.
The daily accumulated price resets as it should at midnight, but it resets again at 01:00 too.
In addition the montly acc…
-
Hi, I got this to work yesterday on my RBpi4B and an "Aidon 6484 SE"-meter. It works great and was simple to install and get working even for me as a dummy! But I think the parsing results in corrupt …