-
Hi! Thanks for indi-allsky, been running it for about six months and it works really well.
I use a Raspberry Pi HQ camera in DNG mode with no AWB, but do use SCNR average neutral processing. No oth…
-
I had to do a fresh install today using Bullseye OS and after the setup the WEBpage will not load just get not found.
-
I tried to create darks using the procedure described (https://github.com/aaronwmorris/indi-allsky/wiki/Dark-Calibration-Frames).
It sees pictures are taken but at the end I get a "ValueError":
…
-
I have 2 that have been running for months. Today I went to the System menu and get The server encountered an internal error and was unable to complete your request. Either the server is overloaded or…
-
I have an issue that the image capture won't restart as night falls. I have seen this issue occur over many nights recently, and I have had to manually intervene.
The log shows the nightfall transi…
-
I receive the following exception when trying to use the IMX296 global shutter module.
I assume that because the IMX296 is monochrome, it does not have the INDI_RAW control.
Sorry for the format…
-
Support Arducam Pivariety IMX462
[IMX462.txt](https://github.com/thomasjacquin/allsky/files/13630398/IMX462.txt)
-
Pi HQ Camera 4056x3040 resolution; binned is 2028x1520
So I have the PiCapture.cpp "fix" in for binning (see [https://github.com/AllskyTeam/allsky/discussions/1685#discussioncomment-9073792](url)) …
-
During installation and whenever Allsky starts, it should check if the current camera is supported, and tell the user. It should also tell the user how to request the camera be supported.
-
Hi,
I have moved the server to run remotely with regards to the indiserver. It's a 100 mbit connection with low latency (10-20 ms) and they are bridged in the form that the remote RaspberryPi with …