-
Hi, I have a question regarding portability of picovoice products.
I've used the demos on raspberry pi a while ago. Now, I'm thinking about porting applications on a Appolo2 from Ambiq.
(https://a…
-
Hi there,
I'm simply trying to compile the built-in SdFat example "LowLatencyLogger" on the Artemis Redboard Nano.
The example compiles fine on other boards, like the Arduino Uno.
However, when …
-
Based on a post on the SparkFun forum https://forum.sparkfun.com/viewtopic.php?f=182&t=57779, I looked into this problem.
**Error description**
Any ArduinoBLE example (e.g. Batterymonitor) will fa…
-
### Subject of the issue
I am not able to upload code to SparkFun Edge using Arduino IDE. It always keeps waiting at "sending hello". It seems the bootloader is not responding.
### Your workbench…
-
It looks like Ambiq came up with a beefier Apollo 3, with in particular double the Flash and double the RAM: https://ambiq.com/apollo3-blue-plus/ .
Any hope that SF may upgrade its line of products…
-
Hi,
I am trying to use this crate on an ambiq apollo3, but I always get None back. I've set up memory.x as follows:
```
ENTRY(Reset_Handler)
MEMORY
{
FLASH (rx) : ORIGIN = 0x00010000, LENG…
-
I was wondering about the following: is there some form of "unique" chip ID that could be use as an ID tag? For example, a serial number "burnt" somehow on the Ambiq chip that can be read by a program…
-
I am debugging an Ambiq Apollo3 target (Cortex-M) that uses FreeRTOS, the debug interface is a JLink.. I find that if I run the code without breakpoints it appears to work. However, if I have a breakp…
-
I have a few questions about the "EEPROM emulation" (really, non volatile memory using the Flash memory instead of the volatile RAM).
- is there any major drawback to using the flash memory? In par…
-
[Open Source Promotion Plan - Summer 2020](https://isrc.iscas.ac.cn/summer2020/#/index)项目列表
(以下四个项目的开源协议均为: [Apache License 2.0](https://github.com/XiaoMi/mace/blob/master/LICENSE)).
项目一
------…
lu229 updated
2 years ago