-
Hi,
This library and simple2 sometimes stuck at check_msg() and never return from it. I think it's due to Socket timeout or connection issue. This happen now and then and it happen more often when th…
-
Hi
Please can you advice where the SPI pins are.
On the PCB it has printed SCK=io5, MOSI=io27, MISO=io19
How do I physically connect to these pins? I can't see any pin outs on the board with th…
-
Hi guys,
I am fairly new to Arduino.
I have managed to figure out majority of the stuff myself, but I am stuck on the "uploading code" to the esp32 part.
I understand that this is a functioning…
-
Hi, and thanks for sharing your work !
I was gifted a [Chinese copy of the EleksTube](https://www.ipstube.com/en/product/IPStube-401.html), and decided to see if I could reverse-engineer it. Doing …
-
I have my CNC almost completely set up but have run into a strange issue, the homing process complete successfully, all limit switches are set to normally open, and all of the axis move successfully i…
-
In version 2.5.0, when Nemo portal is selected, the network shows up but when client try to connect it it says there's no WiFi, and don't redirect do captive portal. I'm using a Cardputer. Tried just …
-
Hi, I like to use the vs1053 in combination with the Pico. Do you have recommendations before I start?
Many thanks, Olaf
-
I'm using TFT24 1.1, when i'm trying to update the firmware
it loading to 55% then it stops
-
I opened the 1st available test file "01-SimpleLightBulb.ino".
I ran the program's Verify. I got the following error :
```
HomeSpan\src\HAP.cpp:29:20: fatal error: sodium.h: No such file or directo…
-
### Board
ESP32 DEV MOUDLE
### Device Description
```
void (*)(const uint8_t*, const uint8_t*, int) {aka void (*)(const unsigned char*, const unsigned char*, int)}
In file included fro…