-
Hello,
I'm using an ESP32 to control a LED COB with a PWM.
After the upload, everything is fine. But after 30 sec, the data received by the ESP32 in wifi start to lag. I tried with the debugging p…
-
Hi,
I'm trying your code, but I'm having difficulty addressing the dmx led, a line of 64 led lights up at a time when instead I only turn on one, where am I wrong?
Thanks
-
Hi, this looks useful to me. Thanks for putting it up here, just in time! Just curious about how to tweak it for our setup. I see you have 53x1 in your settings.xml Is that the only thing I'd need to …
-
Hello,
Thanks again for the amazing work you did, creating these wonderful sets of libraries,
For a project, I need a very small controller with a RS485 dmx receiver.
I was planning to use the [M5…
-
Hi there- thanks much for putting together this library!
I'm working on a project that uses 8 32 x 32 RGB LED panels; so in total about 65 universes. Each LED panel has it's own ESP8266 that is run…
-
Compiled, all good. Can connect, send data to light fixtures, change colors etc, but getting flicker all the time. If I set CPU to 80Mhz in Arduino, flicker is almost gone, to one or two a second. Wha…
-
Hello Domas,
I tried to contact you via your work email but I think it did not work. In your setup you showed that you had set the WLED fixtures in soundswitch. When I look in my list, I dont have …
-
_From [nomis52](https://code.google.com/u/nomis52/) on June 27, 2009 23:16:29_
Add support for dmx over midi or something
_Original issue: http://code.google.com/p/open-lighting/issues/detail?id=31_…
-
The library is working great. A nice-to-have feature would be the ability to search for connected devices. Happy to implement that, but what would be the best approach? Should we add a `search` functi…
-
Hello
II managed to have OLA working starting with :9090 but not the RDM tester.
Raspberry 5 8gb
It looks that I have an error during installation:
OlaClientWrapperTest.cpp:52:Assertion
Test na…