-
Hello again,
I have an [atmega8535](https://www.microchip.com/en-us/product/ATmega8535) on my desk, which i can be ISP programmed with my other arduino using the arduino IDE.
Does anyone know wh…
-
What would it take to support the Teensy series of chips - especially the newer 3.x and 4.x families based on Cortex M families?
- Teensy 4.0 and 4.1: "an ARM Cortex-M7 processor at 600 MHz, with a…
-
Hi Everyone,
I'm finally done with updating the avr toolchain, and I'm happy to announce a beta release. Installation on debian/ubuntu/any dpkg based distro (from the repository http://tinyos.stanfor…
-
PIC32MX and PIC32MZ MCUs are vastly faster than AVR, while retaining almost all of the ease of programming via Chipkit's Arduino framework and since Microchip has bought Atmel it is the same company a…
-
Apologies for the late notice, we removed this from the plugin manager some time last year due to:
https://github.com/fluxchief/binaryninja_avr/blob/master/__init__.py#L416-L418
I'd love to re-a…
-
Admittedly, I haven't dug into your repo yet but I have been looking to use a library (like this one) to connect my SDI-12 device (a YSI sensor) with either my Hologram (nee Konekt) Dash device and/or…
-
The microcontoller selection has been narrowed down to 28-pin AVR DA or DB families, either SOIC or SSOP package. For now the development effort assumes either of those, unless it's necessary to narro…
-
in case of missing board selected: Feather M0 as a *sensor* which does not use time
the above mentioned library is only valid for ESP32
why don't you use an universal time library for that functi…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…