-
Hi, I try to follow the c't article to test "bad USB" with a Pi pico and an USB board.
I downloaded the P4wnP1_aloa zip from GitHub and burned it to a micro SD card with piImager.
There should be a …
-
I've been testing for a few days and can conclude that the VL805 does not like USB MIDI devices getting unplugged. It may reset the entire USB bus. This means that mass storage devices are unmounted a…
-
Hi,
I am testing a newly made device and running Fluxengine from a Win10 commandline (admin mode). It was the prebuilt windows version downloaded in 30/07/21.
I get the following:
"fluxengine …
-
Me again,
this is my first breadboard build an I never really used microcontrollers before, so please don't be harsh.
I got [this screen](https://www.az-delivery.de/products/1-3zoll-i2c-oled-displ…
-
### Describe the bug
EVB-LAN8670-USB Ethernet adapter is not detected in Raspberry Pi 4 after multiple times hard plugging and unplugging the device. The issue occurs in both the below cases,
- if…
-
good sir, i have a question regarding bad usb with phison thing..
may you look at this link.. is this the right usb or not?
https://www.bukalapak.com/p/komputer/aksesoris-226/flashdisk/2sepjj-jual-s…
-
Hi, this was working last week, but it seems that now it does not. When booting the usb key, the process stops and the system get stuck on the last line of the screenshot attached.
Then after 20secon…
-
I have installed a fresh version of Allksy on an RPi 4 Model B Rev 1.1 (RPi 4 Model B Rev 1.1) running bullseye. Installation went smooth and ZWO ASI camera was detected up and running.
Now after a c…
-
In the file: BIGTREETECH MANTA M8P V1.0&V1.1 User Manual.pdf
On page 28
Step 2
It says 'Push the DIP switch 4 (USB OTG) and 3 (RPIBOOT) to ON to enter BOOT mode.'
I discovered that there is anot…
-
```
What steps will reproduce the problem?
1. attach USB DAC Naim DAC-V1 (Audiophilleo)
2. with smsc95xx.turbo_mode=n in config.txt
3. I get bad noise or have to force to resample to 48k, than OK
Wha…