-
Firstly thank you for this project, didn't think this would be possible when i opened this smart plug and saw a tuya cb2s module with a chinese beken soc on it, onto the problem at hand, its very con…
-
Hello,
I have a light switch with a BK7231N chip. When I run the Python programming tool, I get an error Cannot Get Bus.
The chip is directly soldered onto the board, and the board itself has a…
-
- [x] CB2x series
- [x] CB3x series
- [x] CBU
- [x] CBLC5
- [ ] CBLC9
- [x] CB1S
- [ ] CB8P
-
I would suggest renaming the Repo to OpenBeken, beacuse the Firmware supports widely more Chips than only the BK7231T.
-
**Describe the bug**
I got a set of new GreenSun smart plugs/meters (see picture bellow), having a CB2S as a controller. Since they are not tuya devices, but VeSync, I had to use UART flashing, which…
-
**Describe the bug**
After flashing via python script as per tutorial, the device flashed and successfully verified.
Upon connecting to the AP of the device, the device appears to not have a working…
FajnB updated
7 months ago
-
**Describe the bug**
I have a daily reboot schedule reboot for my wifi router at 5am. When I’m checking homeassistant, all the openbk devices are offline since 5am and I had to power cycle to get the…
-
I have some DIN relays with power monitoring.
It doesn't look like power monitoring is supported yet. I have 3-4 (similar) different brand devices here I can flash, is there a way I can help test?
I…
-
WiFi RGB controller (Chipset BL602) doesn't work on some WiFi channels. It doesn't work on channels: 9 (2452 Mhz), 10 (2457 Mhz) and 11 (2462 Mhz). The rest of the channels work, other IoT devices wor…
-
**Describe the bug**
Voltage spikes are reported frequently in 30s intervals. This is happening via mqtt with LSPA9 like plug. Plug are with zero load, although same happens with 100W load too.
The …