-
The behavior of the file "firmware-BLTOUCH-ENDER_EXTENDER_400XL.bin" is abnormal.
Normally, auto home moves to the left edge, but "400XL.bin" moves to the right edge.
Please post the corrected firmw…
-
hi all
i have a problem whit the bltouch when i wil print with octoprint it wil work 1 time
wil i print the next print it wil not the norzel go in to the bed
if i print from sd it go all times go…
-
tryed a couple of different versions ender 3 v2 4.2.2 tryed [BLTouch-5x5-H32.bin] [BLTouch-3x3-H32.bin] i use an old version on my other printer. trying to get them mirrored. i keep getting stuck a…
-
Can you create a menu item in which you can choose the grid yourself, whether 5x5 10x10 or 15x15 can be selected via bltouch? And a menu item to change hs Mode?
-
The setup I have is:
Machine: Ender 3 Pro
Main board: BTT SKRV1.4 Turbo
Accessories: BLTouch Smart
Firware: Marlin Bugfix 2.0.x (downloaded ~15 days ago)
Sensorless homing works perfect in X an…
-
Hello i have a skr 1.4bturbo, with a bltouch installed. What pin can i use to a servo? I dont use neopixel pin, can i use it for put a servo?
![Capturar](https://user-images.githubusercontent.com/786…
-
There is a problem with auto bed leveling when using the BLTouch.
The problem is that the print head goes into position, but the BLTouch repeatedly just pulls the pin in and out. On the Z-axis the po…
-
The program fails at initialization because it's expecting either [bltouch] or [probe] in printer.cfg.
After connecting to the printer and homing the program throws an error.
I've replaced the stock…
-
I've been talking with @Fragmon a bit about their Kobra work today and an interesting find came up: Bltouch probes don't work with the clock speed set to 200mhz. Flashing a 200mhz config shows a 168mh…
-
I'm facing an issue with BLTouch/CRTouch on my SKR E3 Turbo converted Ender3.
It's actually very similar issue as what's reported on SKR Mini E3. (https://github.com/bigtreetech/BIGTREETECH-SKR-mini-…