-
This is a really awesome project and super useful! I've been able to successfully connect to my Pavlok 2, but I noticed after a while the bluetooth connection just drops randomly after ~ 60 seconds or…
-
I have some related issues pairing and using a bluetooth speaker (JBL GO). The device can be paired only after a reboot or before any management with bluetooth (GUI or CLI). Although the pairing "work…
rnrmi updated
2 years ago
-
Desde que actualicé a 2024.5 he empezado a tener algunos errores en los logs vinculados a esta integración. Salen nada más reiniciar:
`Registrador: homeassistant.util.loop
Fuente: util/loop.py:99
…
-
I connect my RPi to my PC by bluetooth and use `sudo rfcomm bind rfcomm0 AA:BB:CC:DD:EE` to setup a serial connection.
However, when I try to open miniterm with this port by `python3 -m serial.tool…
-
https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/
https://www2.cs.uic.edu/~i101/SoundFiles/
https://support.hifiberry.com/hc/en-us/community/posts/360014876957--DAC2-Pro-Device-Tree-…
-
Would be nice to have possibility to setup Wi-Fi again and connect to another Wi-Fi network after initial Wi-Fi setup.
Possibility to view IP address on connected network also would be nice to have.
-
On the Raspberry Pi, there needs to be a single program which talks to the MCU over whatever medium that we decide. Originally the plan was to use Bluetooth for this, but we could potentially talk via…
-
**Describe the bug**
On some Raspberry Pi 3+ devices, when onboard WiFi is disabled via `dtoverlay=disable-wifi`, Bluetooth also stops working. According to some forum threads this seems to be the ca…
-
Hi,
I've went step-by-step by your readme on a clean RPi 64-bit lite OS, but `python-gobject` and `python-gobject-2` could not be installed, and even when all of other things were done (including t…
-
Hey Guys,
i am running Ubuntu 20.04 LTS and when i run the script for mqtt, i always get an error after short time:
noble warning: unknown handle 71 disconnected!
and after that, it stops working
…