-
With a bme688, gas resistance stays at 12946860, the initialization value.
-
Hi, running the MSA301 example the code seems to work, but I get this:
`Found MSA301. Part ID: 0x00`
then all updates read as this:
`X: 0.5002441, Y: 0.5002441, Z: 0.5002441, Freefall? False, Orien…
-
This issue is about the commissioning of the first board of rev 2.0.
The firmware is prepared and should hopefully work out of the box.
-
Title says it all.
The bme688 makes better use of the new version bsec v2 from Bosch.
Any chance of updating it?
-
### The problem
Im trying to commission a new Adafruit Feather ESP32 V2. It adopts fine using a generic ESP32DEV board type but when I attempt to set the board to `adafruit_feather_esp32_v2` from the…
-
https://www.adafruit.com/product/5046
I've also noticed the BME680 (https://www.adafruit.com/product/3660) is missing if that helps.
-
I started working on a bme688 sensor using the "bme68x" library with BSEC.
When I initialize the sensor in Thonny, using "sens=bme68x.BME68X(0x76,1)", i get this:
INITIALIZED BME68X
VARIANT=BME68…
-
Payload from ping
```
"s":"bm*1420080073642*998.3*41.11*31.02*39825.76|bm*1420080142843*997.1*41.2*30.97*39828.11"
```
Requirements
- Value in the database should support up to 3 decimal places
- "s…
-
Disclaimer: I have yet to print the case, as I've just discovered this project yesterday. If this is the only variable it seems like airflow is extremely limited in the case and a fan to circulate air…
-
Hello,
could you please add support for the Bosch BME688 sensor?
I'm using this https://www.adafruit.com/product/5046 sensor. It's reported as i2c 0x77. I'm not sure if the chip-id has changed f…
muuuh updated
2 years ago