-
### The problem
When using `interrupt_pin` with a CST820 sensor , the touches do not trigger `on_touch` action.
Polling works as expected (removing `interrupt_pin`, and setting `update_interval: 5…
-
Hello
Would it be possible to modify the library to use it with an STM32H757XIH6, it has a flash of up to 2Mb on 2 banks, 8 sectors per bank and 128kb between two sectors. For each recording we must …
-
Following on the [previous discussion regarding interrupts](https://github.com/adafruit/circuitpython/issues/4542#issue-849354712), I am considering how to improve display response to capacitive touch…
-
Hello, group! I'm new here. I specialize in raising birds, especially quails. I'm considering if it's possible to use the RCWL-0516 module to detect movement within an egg that is 8 days into incuba…
-
I'm trying to get the Eleduino touch screen (http://www.eleduino.com/7-0-Inch-1024x600-Pixel-IPS-Hdmi-Input-Capacitive-Touch-Screen-Support-Raspberry-pi-Banana-Pi-Pro-Be-p10533.html) working with an x…
-
Hey,
I have just discovered this project and was wondering what kind of changes need to be made to trezor/core to run it on the Pi Zero. Are there any plans on migrating the model t firmware? Other…
S0PEX updated
11 months ago
-
Installed a fresh install of rasbian 10 buster lite, then connected the hypepixel 4 rectangular touch and then installed the drivers online. Screen works but touch does not recognized, no touch respon…
-
It seems that the ESP32-3248S035C has an issue where the capacitive touch does not work on every 2nd reset of the board. Adding "tp.reset()" before "tp.begin()" prevents the problem in my case. No ide…
-
### Feature Request or Enhancement
I would like to make this [breakout board](https://fr.aliexpress.com/item/1005004083478309.html?spm=a2g0o.order_list.order_list_main.172.d6fe5e5bqs89RU&gatewayAdapt…
BMWK1 updated
12 months ago
-
I've built the boxes and checked that they are working by enabling debug mode. I'm able to see messages between the client and server, and it seems like epee touches work. Unfortunately, they also t…