-
Super nice machine principle! I am curious to the sheet steel and honeycomb cores you describe. Could you share some links to vendors or images?
It would be interesting to see if we could CNC mill …
-
Some G2 commands are throwing assertion errors. For example:
```
----- Hardware not detected, using virtual environment -----
----- Use M111 command to enable more detailed debug -----
*********…
-
![QRcode](https://user-images.githubusercontent.com/2101461/122924065-a2b72000-d365-11eb-9b33-fc97be3555f3.jpg)
I would like to use a CNC machine to engrave qr code with a cylindrical milling cutter …
-
Hello, I just installed my Mks dlc32 v2.1 on a mini CNC. (Firmware : V2.1.0_H35_20220526_02_N_CNC.bin )
Everything seems to be working fine except for the alarm.
I have 3-pin limit switches, they wo…
-
Hi guys! very new to the grblHAL world, and all the CNC world for that matter. Building a Mill machine currently and I would like to use an octopus board I have laying around, the octopus pro F429, al…
-
Hello everyone,
On the last days I've been trying to build a CNC machine using old DVD Players, and Arduino UNO (Chinese Clone) and a Protoneer CNC Shield V3.0. I also used a polymeter to make sure…
-
Hi,
The Mellow Fly Gemini board (https://s.click.aliexpress.com/e/_DDNALgT) Is a hybrid linux SBC and printer controller board. I think it's the perfect candidate for a linux CNC implementation for…
-
I'm adding support for the Marlin firmware when used in CNC machines instead of 3D Printers (Cyclone PCB and Portal Cyclone, for example)
-
In many cases the tool/user coordinates are the most important for keepout areas:
1) CNC machines that change the cutting tool will have different lengths of tool so the Z position in user coordinates…
T3P3 updated
5 months ago
-
I have a garden variety CNC machine.
Measured the backlash with a dial indicator and the backlash correction works great.
However, when using the CNC to mill some stock, the PWM signal goes to the…