-
**Describe the bug**
Hi, using 4.14 or 4.19 versions, the bbbmini - BB-BBBMINI-00A0 or the am335x-boneblack-bbbmini.dtb is not working.
I have this (am335x-boneblack-bbbmini.dtb) with kernel 4.4 wor…
-
I'm a bit of a nix noob I must admit, but I was trying to configure the Raspberry Pi PoE hat so that the thermal trips are a little more sane. Typically this is done with the following in `/boot/firm…
-
### Describe the bug
Hi,
I'm currently building a 4 channel microphone HAT for the raspberry pi based on the AC108. Something similar to the respeaker 4-mic array [respeaker 4-mic array ](https://…
-
The "config.txt" has moved from `/boot/config.txt` to `/boot/firmware/config.txt` for bookworm based releases. The old file has been updated to reflect this:
`cat /boot/config.txt`
```
DO NOT EDI…
-
### Describe the bug
the only ipq807x devices with emmc are:
- prpl haze
- qnap 301w
- spectrum sax1v1k
- zyxel nbg7815
during sysupgrade the loop device within rootfs is created at the wron…
-
Hello,
As discussed in [the forum](https://forum.rvspace.org/t/help-needed-my-dtb-file-got-overwritten/1901) the current u-boot setup in many cases overwrites the dtb on mmc. This seems to be done …
-
After migrating to PYNQ 3.0.0, _pynq.Overlay("bistream_name.bit")_ returns a key error when the underlying FPGA designs has the processing system IP located within a hierarchy. In the traceback below…
-
With the latest BeagleBone console testing image (Debian 10.3), I'm unable to completely disable eMMC in order to have a [Wireless Connectivity Cape](https://www.element14.com/community/docs/DOC-79264…
-
I am trying to compile multirom but I have error:
system/extras/multirom/lib/framebuffer.c:1094:17: error: member reference base type 'atomic_int' (aka '_Atomic(int)') is not a structure or union
expe…
-
1. run any app in profile mode: `flutter run --profile`
2. Press `h` to see a list of available commands:
```
v Open Flutter DevTools.
s Save a screenshot to flutter.png.
w Dump widget hierarch…