-
## The problem
It is not possible to integrate my ONVIF camera that requires an empty password.
The onvif yaml config is no more documented, so the onvif integration setup wizard from Lovelace s…
-
I have a Digoo DG-SP-202 and a Neo both with a puya flash chip id (0x146085) which seem to fail to succesfully OTA a gzipped binary.
The upload goes fine but after a reboot it still comes back with…
-
I've tried the deltaco sh-p02, which uses the same configuration as Digoo NX SP202 (had to fix the calibration only). So it would be unnecessary to have a completely new setup for the device, but if I…
-
Trying to apply the exploit on a Digoo DG-XME, with the lastest available firmware:
`$ ./hs-dvr-telnet LOCAL_IP_REMOVED 2wj9fsa2
Sent OpenTelnet:OpenOnce command.
randNum:89661916
challenge=8966…
-
I have NodeMCU v3, cheap china receiver 433 mhz and Digoo Temp sensor R8S.
Two problems:
NodeMCU don,t save wifi settings with this firmware. I connect to nodemcu AP, settings saved but after reset …
-
## The problem
Can't start onvif platform
ffmpeg: is in the configuration
## Environment
- Home Assistant Core release with the issue: Home Assistant 0.109.6
- Last working Home Assistant Core …
-
It is possible to install hack on Digoo BB-M2 wifi camera?
I connected to the camera by telnet and dumped the firmware (boot, kernel, rootfs, system).
[digoo_firmware.zip](https://github.com/Elias…
-
I'm trying to connect SRX882 with nodeMCU v1.3 and it's not receiving any code. It's working fine with FS1000A and XD RF. Any idea?
-
Hello everyone,
please can someone help on how can I restore a dumped firmware on a BB-M2? I have the files boot.bin, rootfs.bin, kernel.bin & system.bin..
How can i write them back?
Thanks in…
-
[That ](https://github.com/blakadder/templates/blob/master/_templates/digoo-dg-sp01.markdown)template is not configured correctly. Unfortunately, the device becomes extremely unstable after activating…